OSSAFACTORY 125 2013 - 2015
The 2013 Factory 125 is powered by a 125cc, 2-Stroke, liquid-cooled, single cylinder engine. With a cylinder bore of 2.13 in and stroke of 2.15 in, its motor is undersquare, meaning that the cylinder stroke (length) is greater than the bore (width). This makes the engine less powerful than one of similar displacement with a bigger bore, but it does allow for higher torque at low engine speeds. The engine is supported by electronic fuel injection which ensures smooth and timely fuel delivery. Electronic ignition makes starting your bike a breeze and ensures a consistent throttle response.
OSSAFACTORY 125 2013 - 2015 Specs
Type: |
Two-stroke single cylinder inverted admission direct reed crankcase |
Displacement: |
124.9 cm3 |
Bore X Stroke: |
2.1x2.1 in OR 53 mm |
Compression Ratio: |
- |
Horsepower: |
-/- KW(hp)/RPM |
Torque: |
0/- lb-ft/RPM OR 0 Nm/RPM |
Fuel System: |
EFI Kokusan Batery-less System |
Gearbox: |
6-Speed manual |
Clutch: |
Hydraulic |
Primary Drive: |
Gears |
Final Drive: |
Chain |
Frame: |
Tubular profile CR-Mo steel with pipe and forged aluminum lower |
Front Suspension: |
Fork with aluminum bars, 40 mm diameter Marzocchi adjustable compression and rebound |
Rear Suspension: |
Variable progressive system with shock absorber Ohlins TTX adjustable compression and rebound |
Front Brake: |
Disc diameter 185 mm 4-piston caliper |
Rear Brake: |
Disc diameter 150 mm 2-piston caliper |
Overall Length: |
- |
Overall Width: |
- |
Seat Height: |
25.8 in OR 655 mm |
Wheelbase: |
52.3 in OR 1328 mm |
Ground Clearance: |
13.4 in OR 340 mm |
Weight: |
151 lbs OR 68 kg |
Fuel Capacity: |
0.7 gallons OR 2.6 L |
Front: |
2.75 x21 |
Rear: |
4.00 x18 |
Power pack: |
- |
Nominal Capacity: |
- |
Maximum Capacity: |
- |
Charger type: |
- |
Charging time (normal): |
- |
Charging time (quick): |
- |
Range: |
- |
Related OSSAFACTORY 125 2013 - 2015 info
Copyright 2023-2024 -
www.zzdcar.com All Rights Reserved